Dealing with missing system call or ioctl wrappers in Valgrind
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
You're probably reading this because Valgrind bombed out whilst
running your program, and advised you to read this file. The good
news is that, in general, it's easy to write the missing syscall or
ioctl wrappers you need, so that you can continue your debugging. If
you send the resulting patches to me, then you'll be doing a favour to
all future Valgrind users too.
Note that an "ioctl" is just a special kind of system call, really; so
there's not a lot of need to distinguish them (at least conceptually)
in the discussion that follows.
All this machinery is in coregrind/m_syswrap.
What are syscall/ioctl wrappers? What do they do?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Valgrind does what it does, in part, by keeping track of everything your
program does. When a system call happens, for example a request to read
part of a file, control passes to the Linux kernel, which fulfils the
request, and returns control to your program. The problem is that the
kernel will often change the status of some part of your program's memory
as a result, and tools (instrumentation plug-ins) may need to know about
this.
Syscall and ioctl wrappers have two jobs:
1. Tell a tool what's about to happen, before the syscall takes place. A
tool could perform checks beforehand, eg. if memory about to be written
is actually writable. This part is useful, but not strictly
essential.
2. Tell a tool what just happened, after a syscall takes place. This is
so it can update its view of the program's state, eg. that memory has
just been written to. This step is essential.
The "happenings" mostly involve reading/writing of memory.
So, let's look at an example of a wrapper for a system call which
should be familiar to many Unix programmers.
The syscall wrapper for time()
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The wrapper for the time system call looks like this:
PRE(sys_time)
{
/* time_t time(time_t *t); */
PRINT("sys_time ( %p )",ARG1);
PRE_REG_READ1(long, "time", int *, t);
if (ARG1 != 0) {
PRE_MEM_WRITE( "time(t)", ARG1, sizeof(vki_time_t) );
}
}
POST(sys_time)
{
if (ARG1 != 0) {
POST_MEM_WRITE( ARG1, sizeof(vki_time_t) );
}
}
The first thing we do happens before the syscall occurs, in the PRE() function.
The PRE() function typically starts with invoking to the PRINT() macro. This
PRINT() macro implements support for the --trace-syscalls command line option.
Next, the tool is told the return type of the syscall, that the syscall has
one argument, the type of the syscall argument and that the argument is being
read from a register:
PRE_REG_READ1(long, "time", int *, t);
Next, if a non-NULL buffer is passed in as the argument, tell the tool that the
buffer is about to be written to:
if (ARG1 != 0) {
PRE_MEM_WRITE( "time", ARG1, sizeof(vki_time_t) );
}
Finally, the really important bit, after the syscall occurs, in the POST()
function: if, and only if, the system call was successful, tell the tool that
the memory was written:
if (ARG1 != 0) {
POST_MEM_WRITE( ARG1, sizeof(vki_time_t) );
}
The POST() function won't be called if the syscall failed, so you
don't need to worry about checking that in the POST() function.
(Note: this is sometimes a bug; some syscalls do return results when
they "fail" - for example, nanosleep returns the amount of unslept
time if interrupted. TODO: add another per-syscall flag for this
case.)
Note that we use the type 'vki_time_t'. This is a copy of the kernel
type, with 'vki_' prefixed. Our copies of such types are kept in the
appropriate vki*.h file(s). We don't include kernel headers or glibc headers
directly.
Writing your own syscall wrappers (see below for ioctl wrappers)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If Valgrind tells you that system call NNN is unimplemented, do the
following:
1. Find out the name of the system call:
grep NNN /usr/include/asm/unistd*.h
This should tell you something like __NR_mysyscallname.
Copy this entry to include/vki/vki-scnums-$(VG_PLATFORM).h.
If you can't find the system call in /usr/include, try looking in the
strace source code (https://github.com/strace/strace). Some syscalls/ioctls
are not defined explicitly, but strace may have already figured it out.
2. Do 'man 2 mysyscallname' to get some idea of what the syscall
does. Note that the actual kernel interface can differ from this,
so you might also want to check a version of the Linux kernel
source.
NOTE: any syscall which has something to do with signals or
threads is probably "special", and needs more careful handling.
Post something to valgrind-developers if you aren't sure.
3. Add a case to the already-huge collection of wrappers in
the coregrind/m_syswrap/syswrap-*.c files.
For each in-memory parameter which is read or written by
the syscall, do one of
PRE_MEM_READ( ... )
PRE_MEM_RASCIIZ( ... )
PRE_MEM_WRITE( ... )
for that parameter. Then do the syscall. Then, if the syscall
succeeds, issue suitable POST_MEM_WRITE( ... ) calls.
(There's no need for POST_MEM_READ calls.)
Also, add it to the syscall_table[] array; use one of GENX_, GENXY
LINX_, LINXY, PLAX_, PLAXY.
GEN* for generic syscalls (in syswrap-generic.c), LIN* for linux
specific ones (in syswrap-linux.c) and PLA* for the platform
dependent ones (in syswrap-$(PLATFORM)-linux.c).
The *XY variant if it requires a PRE() and POST() function, and
the *X_ variant if it only requires a PRE()
function.
If you find this difficult, read the wrappers for other syscalls
for ideas. A good tip is to look for the wrapper for a syscall
which has a similar behaviour to yours, and use it as a
starting point.
If you need structure definitions and/or constants for your syscall,
copy them from the kernel headers into include/vki.h and co., with
the appropriate vki_*/VKI_* name mangling. Don't #include any
kernel headers. And certainly don't #include any glibc headers.
Test it.
Note that a common error is to call POST_MEM_WRITE( ... )
with 0 (NULL) as the first (address) argument. This usually means
your logic is slightly inadequate. It's a sufficiently common bug
that there's a built-in check for it, and you'll get a "probably
sanity check failure" for the syscall wrapper you just made, if this
is the case.
4. Once happy, send us the patch. Pretty please.
Writing your own ioctl wrappers
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Is pretty much the same as writing syscall wrappers, except that all
the action happens within PRE(ioctl) and POST(ioctl).
There's a default case, sometimes it isn't correct and you have to write a
more specific case to get the right behaviour.
As above, please create a bug report and attach the patch as described
on http://www.valgrind.org.
Writing your own door call wrappers (Solaris only)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Unlike syscalls or ioctls, door calls transfer data between two userspace
programs, albeit through a kernel interface. Programs may use completely
proprietary semantics in the data buffers passed between them.
Therefore it may not be possible to capture these semantics within
a Valgrind door call or door return wrapper.
Nevertheless, for system or well-known door services it would be beneficial
to have a door call and a door return wrapper. Writing such wrapper is pretty
much the same as writing ioctl wrappers. Please take a few moments to study
the following picture depicting how a door client and a door server interact
through the kernel interface in a typical scenario:
door client thread kernel door server thread
invokes door_call() invokes door_return()
-------------------------------------------------------------------
<---- PRE(sys_door, DOOR_RETURN)
PRE(sys_door, DOOR_CALL) --->
----> POST(sys_door, DOOR_RETURN)
----> server_procedure()
<----
<---- PRE(sys_door, DOOR_RETURN)
POST(sys_door, DOOR_CALL) <---
The first PRE(sys_door, DOOR_RETURN) is invoked with data_ptr=NULL
and data_size=0. That's because it has not received any data from
a door call, yet.
Semantics are described by the following functions
in coregring/m_syswrap/syswrap-solaris.c module:
o For a door call wrapper the following attributes of 'params' argument:
- data_ptr (and associated data_size) as input buffer (request);
described in door_call_pre_mem_params_data()
- rbuf (and associated rsize) as output buffer (response);
described in door_call_post_mem_params_rbuf()
o For a door return wrapper the following parameters:
- data_ptr (and associated data_size) as input buffer (request);
described in door_return_post_mem_data()
- data_ptr (and associated data_size) as output buffer (response);
described in door_return_pre_mem_data()
There's a default case which may not be correct and you have to write a
more specific case to get the right behaviour. Unless Valgrind's option
'--sim-hints=lax-doors' is specified, the default case also spits a warning.
As above, please create a bug report and attach the patch as described
on http://www.valgrind.org.
